The CS548 is an individually 2 kVDC isolated 4 channel high CMRR oscilloscope with 14 bit resolution, 500 Msps and 200 MHz BW. It is designed to measure all the signals in an operating power electronic switching bridge on both the low and high sides down to a few nanoseconds rise and fall times precisely with the highest signal fidelity.

Applications include gate drives to measure voltage and charge, the power switch to measure loss and parasitic stress, the output to measure power and spectrum for EMC compliance, and the control system for Gain/Phase and stability.

All CS5X8 models include an isolated DC to 65 MHz Signal Generator, 8 Isolated Digital Inputs and optional Isolated Digital Outputs that can be used for Double Pulse and PWM, combining source and measurement unit together in one compact and clever device.

The system can be configured with multiple extensions including Remote Digitizers with fibers up to 30 m for making measurements at even higher isolation voltages. For the most demanding applications up to four CS548 can be linked to make a 16 channel isolated oscilloscope system, with coherent sampling. 

The Cleverscope will be delivered with the following Standard Accessories:

1x CS1001 10x/1x passive Probe per Analog Channel

1x Common Mode Choke per Analog Channel

CS1301-1 Isolated Digital Pod Input 1 - 4

CS1301-2 Isolated Digital Pod Input 5 - 8

USB-Cable USB-C to USB-A for PC Connection

19 V Power Supply

SMA-BNC Adapter for Signal Generator

1x Ethernetmodul (Cupper or Fiber - Choose which one)

1x 100x or 200x passive Probe per Analog Channel

The latest Software "Cleverscope Multichannel Install x64" can be downloaded free of charge:

Downloads | Cleverscope Mixed Signal USB Oscilloscopes

The software is generally free of charge and does not have any kind of license model.