Remote Control Tool for CS-3x00/CS-5x00 Curve Tracer Series

General

This software is an Windows application and enables communication between PC and CS-3x00 / CS-5x00 series of curve tracers via network.

Note: CS Firmware Ver.1.14 or later required.

Major Functions

• Transfering an xxx.CSV at Excel basis to PC
• Copy of curve tracer display at TIFF, PNG or BMP file basis
• "SETUP" data transfer for SAVE/RECALL
• Send Remote commands

Operating PC Enviroments

Installation Procedure

Un-zip downloaded file "RemoteControlTool_forCurveTracer_e.zip"

It is configured by four files after un-zip as follows:

• Execute installer "Setup_en.exe" and install Remote control tool for Curve Tracer in accordance with instuction of the installer.
• Execute setup.exe from NI-VISA Aruntime folder

Uninstallation

Uninstall will be done from [Add and uninstall appliction] on Windows control panel.

Licensing

• Reverse engineering, reverse complie or reverse assemble of this software.
• Modification on this software, creating related software for publishing purpose.

Force Major

• This software is for "free download" and Iwatsu does not guarantee any results or etc. Use at users own risks.

Copyrights

• (c) 2011 National Instruments Corporation. All rights reserved.
• (c) 2011 IWATSU TEST INSTRUMENTS CORPORATION. All rights reserved.

Downloads

LabView Driver for CS-3000/CS-5000 series (2014/08/21 UP)

General

This is a sample of drivers and software for remote control in LabVIEW on.

Operating PC Enviroments

Licensing

• Reverse engineering, reverse complie or reverse assemble of this software.
• Modification on this software, creating related software for publishing purpose.

Force Major

• This software is for "free download" and Iwatsu does not guarantee any results or etc. Use at users own risks.

Copyrights

• (c) 2011 National Instruments Corporation. All rights reserved.
• (c) 2011 IWATSU TEST INSTRUMENTS CORPORATION. All rights reserved.

Downloads